When a Jeep owner is presented with code P2015, it can be an indication of an issue with the Intake Manifold Runner Position Sensor Performance. This code can be triggered by a variety of issues, such as a 5 volt supply circuit with open or high resistance, shorted to voltage, ground or another circuit, an
The Kia Code P0532 is a significant indicator of a problem with the A/C refrigerant pressure sensor. This code is sent to the ECM (Engine Control Module) and is one of the factors used to determine the idle air control position for the idle speed. If the signal from the sensor is below 0.33V, the
The P0087 trouble code is a diagnostic trouble code (DTC) that indicates a problem with the fuel rail or system pressure being too low. This code is part of the On-Board Diagnostics II (OBD-II) system, which is standard in most vehicles manufactured since the mid-1990s. When the Powertrain Control Module (PCM) detects that the fuel
When your Dodge vehicle is showing code P0652, it is indicating that there is an issue with the powertrain control module (PCM) which contains two internal 5-Volt Sensor Supply sources. This code stands for “Sensor Reference Voltage 2 Circuit Low” which means the PCM will shut off the 5-Volt Supply circuit if it senses a
The P2646 trouble code is a diagnostic trouble code (DTC) that indicates a problem with the rocker arm actuator system, specifically related to the performance or functionality of the actuator on Bank 1 of the engine. This code is commonly associated with vehicles equipped with Variable Valve Timing (VVT) systems, such as Honda’s VTEC (Variable
The FIAT Code C0051-54 indicates a potential problem with the steering wheel position sensor that has caused a missing calibration. This code is triggered when the steering angle neutral position is not detected by the ABS (Anti Lock Brake) control unit or the EPS (Electric Power Steering) control unit. Common reasons for this code to
Honda code P0872 is an issue that can affect the transmission of a Honda vehicle. It is caused by an electrical circuit problem and is triggered when the input signal from the 4th clutch transmission fluid pressure switch to the PCM is low when driving in the 5th gear. This code can be problematic and
When it comes to diagnosing and troubleshooting Volvo vehicles, the CEM-U015500 code is a critical indicator of potential issues. This code is generated when there is lost communication between the control module and the driver information module (DIM). This code can be triggered by a variety of issues, ranging from lack of power supply to
When it comes to Ford vehicles, code P1016 is one of the most common diagnostic trouble codes (DTCs) that appears. The code is related to the wastegate control pressure that is higher than expected and typically sets when the measured wastegate vacuum sensor reading is higher than the expected reading by more than the calibrated
Solution: Replace the throttle body Replace the idle air control valve Replace the throttle position sensor If you own a Subaru and have encountered the code P0519, it could be an indication of an Idle Control System Malfunction (fail safe). This means that the engine is running at a higher speed than the specified idle
Solution: Replace ECM Update ECM Check wiring harnesses and connectors Audi Code P150A is an engine off timer performance that is triggered when the key is on after the ECM run time is active and when the key is on during ECM after run time is active and CAN active. This code can be caused