The GMC Code B320A 4B is a powerful tool used in diagnosing and troubleshooting the front door window motor. This code is used to identify the calibration not learned during the power window switch activation and is triggered when there is a loss of voltage in the B+ circuit or an open/high resistance in the
Saturn Code P1779, also known as Engine Torque Delivered To TCM Signal, is an issue that affects Saturn vehicles. The code appears when the engine starts, and the engine speed is over 500 rpm for 5 seconds, the system voltage is over 10.0v, Fuel Cutoff is inactive, and the TCM does not receive the required
The P2004 trouble code is a diagnostic trouble code (DTC) that indicates an issue with the Intake Manifold Runner Control (IMRC) system, specifically that the solenoid for Bank 1 is stuck in the open position. This code is generated by the vehicle’s Powertrain Control Module (PCM) when it detects that the IMRC actuator is not
When a Dodge Code P2314 appears, it is usually an indication of an issue with the ignition coil. This diagnostic monitor is designed to verify that each coil-on-plug Ignition Coil has achieved a sufficient burn. The issue could be caused by several factors, ranging from a Fused Automatic Shut Down (ASD) Relay Output circuit open/high
When it comes to diagnosing Honda vehicles, the Honda trouble code P2279 is an indication of an intake air system leak. This code is triggered when two conditions are met. The first condition is when the estimated volume of intake air is 310 l/min (327.6 US qt/min, 272.8 lmp qt/min) or more when the MAP
The Volkswagen Code P0411 is an error code indicating an issue with the Secondary Air Injection System. This code is triggered when the Engine Control Module (ECM) detects a problem with the Secondary AIR pump airflow, which means that the pump is functioning but the quantity of air is not enough. The error code is
When it comes to the Dodge Code P1404, it is a warning sign of potential issues with the EGR position sensor rationaluty. This code is triggered when the engine is running and the EGR flow or valve movement is not what is expected. There are a few potential causes for this issue, including a good
The Saturn code P2637, or Transmission Torque Delivered Circuit, is a common issue among Saturn owners. This code is triggered when the engine run time exceeds 5 seconds, and no other CAN errors are present. It can be a tricky problem to diagnose and fix if you are not a certified Saturn mechanic. This article
Jeep Code P242B is a diagnostic code that indicates a malfunction in the Exhaust Gas Temperature Sensor circuit related to Bank 1 Sensor 3. This code is the result of a 2-trip fault, which causes the Powertrain Control Module (PCM) to illuminate the Malfunction Indicator Lamp (MIL) and disable active regeneration mode. To resolve this
The P0013 trouble code is a diagnostic trouble code (DTC) that indicates a malfunction in the ‘B’ Camshaft Position Actuator Control Circuit for Bank 1. This code is part of the OBD-II system, which monitors various components of the vehicle’s engine and transmission to ensure optimal performance. When the Powertrain Control Module (PCM) detects an
When it comes to diagnosing and repairing Ford vehicles, it is important to understand the meaning of the code P2457. This code stands for the Exhaust Gas Recirculation (EGR) Cooler System Performance, and it is triggered when the difference between the expected temperature of the exhaust gas and the actual exhaust gas recirculation temperature bank